- Two Powerful UV germicidal lamp
- Overhead White fluorescent light
- Timer Control for UV irradiation
- Dimension : 40cm(L)x50cm(W)x60cm(H) (MX 1289-01)
- Dimension : 60cm(L) x 60cm(W) x 70cm(H) (MX 1289-02)
- UV Source : 2×15 watts / 2 x 8 watts UV tube
- White Light : 3 x 8 watts / 2 x 8 watts fluorescent lamp
- Input : 220V AC 50-60Hz
- Fuse : 1 Amp
| Ordering Information | ||
| Cat.No | Product | Units |
| MX-1289-01 | MEDOX-BIO® PCR Work Station-Compact | Each |
| MX-1289-02 | MEDOX-BIO® PCR Work Station-Rgular | Each |
- Speed : 1 to 57 Rocks/min
- Tilt angle : 12°
- Max. Load : upto 5 kg
- Timer : 1min. to 999 min (1 min to 16.65 Hrs)
- Platform Working Area : 300 x 200mm
- Dimension : 310 x 240 x 160mm
- Input Voltage : 220V AC
- Input Current : 0.5 Amps
- Power : 115 wattts
- Can be tailor made based on customers specification at extra cost
| Ordering Information | ||
| Cat.No | Product | Units |
| MX-1290-01 | MEDOX-BIO® Gel Rocker | Each |
| MX-1290-02 | MEDOX-BIO® Gel Rocker with Electronic Timer | Each |
Specifications
- Model : pH – 01
- Measurement : pH / mV
- Range : 0-14 pH / 0-1999mV
- Resolution : 0.01 pH / 1 mV
- Accuracy : ± 0.01 pH ± 1 digit / ± 1 mV ± 1 digit
- Repeatability : ± 0.01 pH / ± 1 mV
- Operating : 0 to 50 ° C (32 ° F to 122 ° F)
- Input impedance : > 10 12 Ohms
- PH Electrode : Combined electrode with BNC attachment
- Slope Control : 85 to 110%
- Dimensions : 75 x 260 x 210mm
- Power : 230V + 10%, 50 Hz
- Display : 3 1/2 Digit segment Led with automatic decimal point positioning and polarity indication
- Standardization : ± 2.5 pH at 25 ° C adjustable in steps of .01 pH with 10 times accurate setting then conventional ones.
- Temperature : Manual, continuously adjustable from 0 to 100 ° C ( Automatic – option)
- Accessories : Combile Electrode, Stand, Instruction Manual & Buffers
| Ordering Information | ||
| Cat.No | Product | Units |
| MX-1292-02 | MEDOX-BIO® pH Meter | Each |
| Ordering Information | ||
| Cat.No | Product | Units |
| MX-1292-02 | pH Electrode | Each |
| Ordering Information | ||
| Cat.No | Product | Units |
| MX-1293-01 | MEDOX BIO TLC Plate Viewer | Each |
Made up of white transparent acrylic sheet with UV protection
Dimensions : 40cm(L) x 40cm(D) x 40cm(H)
| Ordering Information | ||
| Cat.No | Product | Units |
| MX-1293-01 | MEDOX-BIO® UV Shield | Each |
All PCR plastic consumables are produced in a state-of-the-art, class K (100,000) clean-room injection moulding facility. A sophisticated system of high-tech filters removes particles, including bacterial cells, from the atmosphere. This ensures that these PCR plastics are free from contaminants, including endotoxins, which may affect experimental
results. The features of Clean-room produced PCR plastic consumables are as follows:
- No particle contamination
- Free from nucleases and contaminating DNA
- Endotoxin – free
- No discolouring and brittleness
- Moulding from virgin polypropylene ensures plastic integrity
- Thin-walled design for efficient heat transfer in PCR
- Raised rim feature for maximum sealing options
|
Thin – Walled PCR Tubes |
||
| Cat.No | Product | Units |
| MX-0201-01 | 0.2ml PCR Tube-Flat Cap | 1,000 tubes |
| MX-0202-01 | 0.2ml PCR Tube-Domed Cap | 1,000 tubes |
| AB-0620 | 0.2ml Individual Thermo-Tube-Flat Cap | 1,000 tubes |
| AB-0337 | 0.2ml Individual Thermo-Tube-Domed Cap | 1,000 tubes |
| MX-0203-01 | 0.5ml PCR Tube-Flat Cap | 1,000 tubes |
| AB-0350 | 0.5ml Individual Thermo-Tubes-Flat Cap | 1,000 tubes |
| AB-0489 | 0.5ml Individual Thermo-Tube-Domed Cap | 1,000 tubes |
|
PCR Tube – Strips & Caps |
||
| MX-0204-01 | Strips of 8 PCR Tubes | 120 strips |
| MX-0205-01 | Strips of 8 PCR Tubes & Domed Caps | 120 strips |
| MX-0206-01 | Strips of 8 Domed Caps | 120 strips |
|
PCR Plates |
||
| MX-0207-01 | 96 well – 0.2ml PCR Plate, Chimney Top | 10 plates |
| MX-0208-01 | 384 well – 30 ul PCR Plate | 10 plates |
|
Storage Plates |
||
| MX-0209-01 | 96 well 2 ml Deep well plate | 10 plates |
| MX-0210-01 | 96 well 2 ml Deep well plate – Sterile | 10 plates |
| MX-0211-01 | 384 well – 80 ul Sample plate | 10 plates |
|
Plate Sealing |
||
| MX-0212-01 | Sealing Film | 100 sheets |
| MX-0213-01 | Sealing Film – Sterile | 100 sheets |
| * To choose a colour other than natural, please suffix the Cat. No. with either A for Amber, B for Blue, G for Green, P for Purple, R for Red or Y for Yellow | ||
The complete range of TPP Tissue culture Flasks made to the highest manufacturing standards and come with a regulated and guaranteed surface treatment of the growth zone. The largest model, with the growth surface of 300cm 2 , has inscription fields on both sides of the flask.
| Ordering Information | ||
| Cat. No. | Product |
Pce / Pack |
| 90025 | Cell culture Flask 25cm2, sterile, 360nos/cs (36/10) |
10 |
| 90026 | Cell culture Flask/Filter Cap, 25cm2, sterile, 360nos/cs (36/10) |
10 |
| 90075 | Cell culture Flask 75cm2, sterile, 100nos/cs (20/5) |
5 |
| 90076 | Cell culture Flask/Filter Cap, 75cm2, sterile, 100nos/cs (20/5) |
5 |
| 90150 | Cell culture Flask 150cm2, sterile, 36nos/cs (12/3) |
3 |
| 90151 | Cell culture Flask/Filter Cap, 150cm2, sterile, 36nos/cs (12/3) |
3 |
| 90300 | Cell culture Flask 300cm2, sterile, 18nos/cs (6/3) |
3 |
| 90301 | Cell culture Flask/Filter cap 300cm2, sterile, 18nos/cs (6/3) |
3 |
| 90551 | Peel-off’ Cell culture Flask 150cm2, Sterile, 18nos/cs (6/3) |
3 |
| 90651 | Peel-off’ Cell culture Flask 115cm2, Sterile, 18nos/cs (6/3) |
3 |
High quality, clear polypropylene / polystyrene is used to manufacture these tubes. The white marking spot on the yellow screw cap is the unique feature of these tubes and either a pencil or ballpoint can be used to leave a smudge-proof identification marking
| Ordering Information | ||
| Cat. No. | Product |
Pce / Pack |
| 91015 | Centrifuge Tubes 15ml, Conical, PP 800nos/cs (20/40) |
40 |
| 91115 | Centrifuge Tubes 15ml, Conical, PS 800nos/cs (20/40) |
40 |
| 91050 | Centrifuge Tubes 50ml, Conical, PP 360nos/cs (18/20) |
20 |
| 91051 | Centrifuge Tubes 50ml, Skirt, PP 320nos/cs (16/20) |
20 |
| 91515 | Rack 50/15 PP with 30 x 15 ml Centrifuge Tubes, 10nos (10/1) |
1 |
| 91550 | Rack 50/15 PP with 20 x 50 ml Centrifuge Tubes, 10nos (10/1) |
1 |
These expendable pipettes are made of virgin polystyrene, colour coded and individually wrapped. The cotton plug in the upper end is securely fixed and will not fall out. Special attention has been given maximizing the negative graduation of the volume scale.
| Ordering Information | ||
| Cat. No. | Product |
Pce / Pack |
| 94001 | Serological Pipettes 1ml, Sterile, 400nos/cs (400/1) |
1 |
| 94002 | Serological Pipettes 2ml, Sterile, 300nos/cs (300/1) |
1 |
| 94005 | Serological Pipettes 5ml, Sterile, 200nos/cs (200/1) |
1 |
| 94010 | Serological Pipettes 10ml, Sterile, 200nos/cs (200/1) |
1 |
| 94025 | Serological Pipettes 25ml, Sterile, 100nos/cs (100/1) |
1 |
Tissue culture test plates exhibit a maximum standard of workmanship. Ordinary ballpoint pens can be used on the yellow inscription areas. A controlled gas exchange is ensured by the aeration system incorporated in the lid of each plate. The alphanumeric well coordination is inlaid in black and can be clearly recognized at practical distances.
| Ordering Information | ||
| Cat. No. | Product |
Pce / Pack |
| 92006 | Cell culture Test Plates 6 wells, 126nos/cs (126/1) |
1 |
| 92406 | Cell culture Test Plates 6 wells, 64nos/cs (16/4) |
4 |
| 92012 | Cell culture Test Plates 12 wells, 126nos/cs (126/1) |
1 |
| 92412 | Cell culture Test Plates 12 wells, 64nos/cs (16/4) |
4 |
| 92024 | Cell culture Test Plates 24 wells, 126nos/cs (126/1) |
1 |
| 92424 | Cell culture Test Plates 24 wells, 64nos/cs (16/4) |
4 |
| 92697 | Cell culture Test Plates 96 wells, U, 96nos/cs (16/6) |
6 |
| 92097 | Cell culture Test Plates 96 wells, U, 162nos/cs (162/1) |
1 |
| 92696 | Cell culture Test Plates 96 wells, F, 96nos/cs (16/6) |
6 |
| 92096 | Cell culture Test Plates 96 wells, F, 162nos/cs (162/1) |
1 |
Tissue culture Dishes have a highly transparent and perfect flat base, which ensures distortion-free microscopy. The clock numbering system (3,6,9 and 12) inlaid into the base of the dish allows easy identification and documentation of zones. The protruding edge (non-slip ring) around the dish enables an easy and safe separation of the upper and lower parts, as well as providing a safe handling.
| Ordering Information | ||
| Cat. No. | Product |
Pce / Pack |
| 93040 |
Tissue culture Test Plates 40mm/9.2cm2, 900nos/cs (45/20) |
20 |
| 93060 |
Tissue culture Test Plates 60mm/22.1cm2, 840nos/cs (60/14) |
14 |
| 93100 |
Tissue culture Test Plates 100mm/60cm2, 240nos/cs (24/10) |
10 |
| 93150 |
Tissue culture Test Plates 150mm/147.8cm2, 100nos/cs (20/5) |
5 |
These Cell scrapers allow the gentle scraping and harvesting of tissue cultures in all types of flasks, dishes and tubes. The special feature here is the twisting range of the blade that allows changes in blade angle while directly over the culture surface. The blade angle can be easily manipulated into even the most difficult of flask corners. Hence there is no need for scraper removal during the scraping and collection process.
| Ordering Information | ||
| Cat. No. | Product |
Pce / Pack |
| 99002 | Cell Scraper, Length 24cm, 150nos/cs (150/1) |
1 |
| 99003 | Cell Scraper, Length 30cm, 150nos/cs (150/1) |
1 |
| 99004 | Cell Scraper, Length 38cm, 100nos/cs (100/1) |
1 |
| 99010 | Cell Spatula, Length 20cm, 150nos/cs (150/1) |
1 |
The external threaded cryotubes are designed for transportation and specimen processing within the laboratory. The starshaped base hinders rotation of the tube in its rack while opening the cap thus allows one- handed opening.
| Ordering Information | ||
| Cat. No. | Product |
Pce / Pack |
| 89012 | Cryotubes, PP, Graduated, 1.2ml, 800nos/cs (8/100) |
100 |
| 89020 | Cryotubes, PP, Graduated, 2ml, 800nos/cs (8/100) |
100 |
| 89040 | CryotubesPP, Graduated, 3.8ml, 400nos/cs (4/100) |
100 |
| 89050 | Cryotubes, PP, Graduated, 4.5ml, 400nos/cs (4/100) |
100 |
| 99015 | Cryo Box 75 x 130 x 46mm, (9 x 9 array) 20nos/cs (20/1) |
1 |
| 99016 | Rack PP for 40 Cryotubes, 12 nos/cs (12/1) |
1 |
A light and uncomplicated design makes the yellow rack an indispensable aid when using centrifuge tubes. The heat resistant rack material allows its use in autoclaves.
| Ordering Information | ||
| Cat. No. | Product |
Pce / Pack |
| 99018 | Multi-Rack PP for all Tubes, 28 nos/cs (28/1) |
1 |
| 99019 | Rack 50/15, PP for 20 x 50 ml / 30 x 15ml conical Tubes, 30 nos/cs (30/1) |
1 |