New · LiveGEL Viewer 2.0 · For the Amber range

Watch the bands as they run.

LiveGEL Viewer 2.0 holds your Amber tank over blue light, with the power supply built in. When the run is done, photograph the gel on your phone under the included hood.

See how much space it saves
LiveGEL Viewer 2.0 with an Amber gel tank inside, lit by blue light, DNA bands showing in the gel and the documentation hood on top
Power supply
Built in
Light
Blue, not UV
On your phone
Image capture
Warranty
1 year
One for four

Four instruments, or one.

A tank, a power supply, a transilluminator and a camera setup each need their own place on the lab table, and their own cable. Viewer 2.0 puts your tank, the power supply and the light in one case. Your phone does the camera's job.

Lab table, top view: four instruments, or one Usually a gel tank, a power supply, a transilluminator and a camera setup each take their own place on the lab table, with their own cables. With LiveGEL Viewer 2.0, the Amber tank sits inside one unit that has the power supply and blue light built in, and the rest of the table is free. 10 cm Lab space used LiveGEL Viewer 2.0 Power supply Transilluminator Camera setup Gel tank Space back for your lab
Top view of a lab table. The Amber Midi tank is drawn to scale (20.6 × 15 cm). The other footprints are typical sizes, so the space saved is an estimate.
Instruments
4
Separate power supply
Needed
See the bands
After the run
Lab space saved
None
Inside the Viewer

Built around your tank.

A power supply sits under your Amber tank, blue LEDs line the side walls around it, and a documentation hood goes over it. Switch the light on and the bands show up while the gel runs. Try the switches.

How LiveGEL Viewer 2.0 goes togetherExploded drawing, animated. The built-in power supply is the base. Your Amber gel tank sits in the top, between blue LED strips on the side walls. The documentation hood goes over both, with a filter window on top for a phone camera. Switches and output sockets are on the front.Built-in power supplySwitches and output socketsRun control dialBlue LEDs on the side wallsYour Amber gel tankGelDocumentation hoodFilter window for your phoneFILTER WINDOW FOR YOUR PHONEDOCUMENTATION HOODBLUE LEDS ON THE SIDE WALLSBUILT-IN POWER SUPPLYGELYOUR AMBER GEL TANKRUN CONTROL DIALSWITCHES AND OUTPUT SOCKETS
Illustration of LiveGEL Viewer 2.0. Proportions approximate; band pattern illustrative.
  1. Documentation hoodGoes over the Viewer when the run is done, so you can photograph the gel.
  2. Filter windowHold your phone over the window on top and take the picture through the filter.
  3. Your Amber tankAccepts Amber horizontal gel systems from Mini to Midi Plus, seated between the blue LEDs. Maxi models and larger are not compatible.
  4. Blue LEDs, 470 nmLED strips on the side walls light the gel from the sides while it runs. Blue light, not UV.
  5. Built-in power supplyRuns the gel from inside the Viewer. No separate power supply box on the table.
  6. Switches and run dialSeparate switches for power and blue light, and a dial to control the run.
How it works

Three steps from tank to photo.

  1. Set your Amber tank inThe tank sits in the top of the Viewer, between the blue LED strips on the side walls. Plug its leads into the sockets on the Viewer.
  2. Switch on power and blue lightEach has its own switch on the front. The bands show up as the gel runs.
  3. Cover it and take the picturePut the documentation hood on and photograph the gel through the filter window with your phone.
Specifications

Tech specs

MX-1918-01
Works with
Amber horizontal gel systems: Mini, Mini Plus, Mini XL, Midi and Midi Plus. Not compatible with Maxi models and larger.
Power supply
Built in: 50, 100, 150, 200 and 250 V DC, up to 100 mA
Illumination
Blue LEDs, 470 nm, on the side walls around the tank
Controls
Separate switches for power and blue light; run control dial
Documentation
Hood with a filter window, for photographing the gel on a phone
Footprint
About 34 × 30 cm
Mains input
220 V AC, 50 to 60 Hz, single plug
Warranty
One year

Which LiveGEL is right for you?

You are here LiveGEL Viewer 2.0 See bands while the gel runs, and photograph them on your phone. For labs and classrooms that already use Amber tanks.
Also new LiveGEL Imager 2.0 A closed imaging cabinet with a 12 MP camera that finds and measures bands, then makes a PDF report. Explore Imager 2.0 →

Looking for our original LiveGEL Imager? A dark-room cabinet with a 12 MP camera that saves your gel images to a computer. See the LiveGEL Imager →

Questions

Questions

Do I need an Amber tank?

Yes. Viewer 2.0 is an add-on for the Amber range and accepts Amber horizontal gel systems from Mini to Midi Plus. Maxi models and larger are not compatible. Starting from scratch? The UV-Free Safe Teaching Bundle comes with an Amber Mini Plus tank, Fluoro Gold Dye and agarose.

Do I need a separate power supply?

No. The power supply is built into the Viewer, with its own switch on the front.

How much lab space does it save?

One unit takes the place of a separate power supply, transilluminator and camera setup. It needs about 34 × 30 cm of table, roughly 60% less than the four instruments side by side.

How do I photograph the gel?

Put the documentation hood over the Viewer and take the picture through the filter window with your phone.

Does it use UV light?

No. It lights the gel with blue light, so there is no UV to shield your eyes and skin from, and you can cut bands out without UV damaging your DNA.

Which stains work with it?

Blue-light DNA stains such as MEDOX Fluoro Gold Dye, added to the gel when you cast it, give the clearest bands. Ethidium bromide also works, but its bands look fainter under blue light than under UV.

See it in your lab.

Add it to your Quick quote, or ask for a demonstration with your own Amber tank. Made by MEDOX, with a one-year warranty.

Ask for a demo

Send us your list. We’ll send a quote.

Search the catalogue, add what you need and send your list in one step. Or talk to our team.