The Amber range.

Gel systems that separate DNA, RNA and proteins by size, and blot proteins onto membranes. Twenty models in three formats, and any other size made to order.

Models
20
Samples per run, up to
336
Largest gel
25 × 30 cm
Other sizes
Made to order
How a horizontal gel runs

Straight, sharp bands, every run.

An electric field pulls DNA through the gel toward the positive end. Smaller fragments move faster, so they separate by size. The tank decides the rest: an even field from end to end, and buffer that stays put. Amber electrodes are tested for an even field and every tank is guaranteed not to leak, so the bands you load come out straight and easy to read.

How a horizontal gel tank worksCutaway of an Amber horizontal gel tank. A gel sits on a tray in running buffer. Samples are loaded into wells near the negative electrode, and DNA moves through the gel toward the positive electrode, separating into bands by size.Buffer tankRunning bufferGel platformUV-transparent gel trayAgarose gelSample wellsDNA bandsNegative electrode (−)Positive electrode (+)NEGATIVE ELECTRODE (−)AGAROSE GELDNA BANDSSAMPLE WELLSPOSITIVE ELECTRODE (+)BUFFER TANKRUNNING BUFFERUV-TRANSPARENT GEL TRAYGEL PLATFORMDNA MOVES TOWARD +
How a horizontal gel tank worksCutaway of an Amber horizontal gel tank. A gel sits on a tray in running buffer. Samples are loaded into wells near the negative electrode, and DNA moves through the gel toward the positive electrode, separating into bands by size.Buffer tankRunning bufferGel platformUV-transparent gel trayAgarose gelSample wellsDNA bandsNegative electrode (−)Positive electrode (+)DNA MOVES TOWARD +
  1. 1CastPour the gel in the casting assembly. The comb leaves wells for your samples.
  2. 2Load and runFill the tank with buffer, load the wells, close the lid and connect a power supply.
  3. 3See the resultWatch the bands appear while the gel runs on LiveGEL Viewer 2.0 (Mini to Midi Plus), or view them afterwards on a transilluminator or LiveGEL Imager 2.0.
Inside the tank

A few parts, made to last.

Every Amber horizontal system is built the same way: a clear acrylic tank, a gel tray, platinum electrodes and a lid with an amber window.

Amber horizontal gel tank, exploded viewExploded drawing of an Amber horizontal gel tank: leads, amber UV-filter window, safety lid with lattice cut-outs, gel tray, and the clear buffer tank with an electrode in each end chamber. Illustration, proportions approximate.Buffer tankNegative electrode (−)Positive electrode (+)UV-transparent gel traySafety lidAmber UV-filter windowBlack leadRed leadBLACK LEADSAFETY LIDNEGATIVE ELECTRODE (−)BUFFER TANKRED LEADAMBER WINDOWPOSITIVE ELECTRODE (+)UV-TRANSPARENT GEL TRAY
Illustration of the Amber Midi. Proportions approximate.
  1. Safety lidCovers the buffer and carries the leads, so the gel can only run with the lid on.
  2. Amber windowFollow the run without lifting the lid. On LiveGEL Viewer 2.0 it filters the blue light, so the bands show while the gel runs.
  3. UV-transparent gel trayLift the gel out on its tray and take it straight to imaging.
  4. Platinum electrodesOne across each end chamber. Detachable on horizontal models.
  5. Clear acrylic tankDeep buffer chambers at each end, with the gel bed raised between them. Guaranteed not to leak.
  6. Colour-coded leadsRed to positive, black to negative, so the run always goes the right way.

Three formats. Pick by what you separate.

9 models
Horizontal For DNA and RNA in agarose gels The gel lies flat under the buffer. The everyday workhorse for checking PCR products and DNA extractions. Mini to Mega
7 models
Vertical For proteins in polyacrylamide gels The gel stands between glass plates. Used for SDS-PAGE and native PAGE. Mini to Maxi
4 models
Blotting For moving proteins onto a membrane Transfers proteins from a vertical gel to a membrane for western blotting. Mini and Midi

Compare every model.

Model SamplesLargest gelBuffer volumeCatalogue no. Action
Amber Mini 24 10 × 7 cm 300 ml MX-2100-01
Amber Mini Plus 36 10 × 9.5 cm 400 ml MX-2101-01
Amber Mini XL 60 10 × 12.5 cm 400 ml MX-2102-01
Amber Midi 54 10 × 13 cm 500 ml MX-2103-01
Amber Midi Plus 75 10 × 15.3 cm 500 ml MX-2104-01
Amber Maxi 150 20 × 20 cm 600 ml MX-2105-01
Amber Maxi Plus Water circulation 200 20 × 25 cm 800 ml MX-2106-01
Amber Maxi XL Water circulation 336 25 × 30 cm 900 ml MX-2107-01
Amber Mega Water circulation 336 25 × 15 cm (×2) 950 ml MX-2108-01
Made to order

Need a size we don't list? We'll build it.

We design and make every Amber system ourselves, so the 20 models above are where the range starts, not where it ends. Tell us the gel size, the number of samples or any other specification your work needs, and we will build the system to it.

  1. Tell us what you needGel size, samples per run, format, or a drawing if you have one.
  2. We confirm the specificationYou get a quote for exactly that system.
  3. We build itMade in our own factory, with the same one-year warranty.

Built into the range.

Platinum electrodesOn every horizontal, vertical and blotting system, and tested to give an even field across the gel.
Combs includedHorizontal systems come with colour-coded, height-adjustable combs in polished acrylic, and a preparative comb.
Tape-free castingEvery horizontal tank comes with its own gel casting assembly. A wedge clamp seals the tray, so you pour the gel without tape.
CoolingWater circulation keeps the gel cool on long runs, on the Maxi Plus, Maxi XL and Mega. The Blotting Mini Dual and Midi Dual have gel cooling.
One-year warrantyOn every Amber system, made by MEDOX.

Starting from scratch?

Combos put an Amber system together with what it needs to run. Bundles add the kit and reagents too. Each one's page lists exactly what is in the box.

Questions

Which format do I need?

Horizontal for DNA and RNA in agarose gels. Vertical for proteins in polyacrylamide gels. Blotting if you need to transfer proteins from a vertical gel to a membrane.

How many samples can I run at once?

From 14 on the Mini Dual vertical system up to 336 on the Maxi XL and Mega horizontal systems. The comparison table lists every model.

Can you make a size that is not listed?

Yes. We make every Amber system ourselves, so we can build one to your size and specification. Tell us what you need and we will reply with what we can make.

Do I need a power supply?

Yes. Every gel system needs a DC power supply. Every Amber combo includes one, and LiveGEL Viewer 2.0 has one built in for Amber horizontal tanks from Mini to Midi Plus. You can also choose one from our power supply range.

Does it work with LiveGEL Viewer 2.0?

Yes, with Amber horizontal systems from Mini to Midi Plus. The tank sits inside the Viewer, and the amber window in the lid filters the blue light, so you see the bands while the gel runs. Maxi models and larger are not compatible.

Can I buy extra trays, combs and glass plates?

Yes. Gel trays, combs, casting assemblies, glass plates, spacers and fiber pads are sold separately, as accessories for each system. Search for the system by name to find them.

See it in your lab.

Add any model to your Quick quote, or ask us to send a demo unit to your lab.

Ask for a demo

Send us your list. We’ll send a quote.

Search the catalogue, add what you need and send your list in one step. Or talk to our team.