Always the uniqueness in a Gel Running system is determined by how convenient it is to Cast & Run the gel. MEDOX-BIO ELECTRO-POUR Gel Running system offers extreme convenience in casting the gel by providing unique Stopper Pads inserted into the slots located at both open-sides of the Gel Running Tray. There is no need for a separate gel casting assembly for casting the gel.

Additional features include:- Orientation guide of Gel Running tray while placing inside the Tank, Green Visualization plate, precisely moulded combs, detachable Electrode assembly for easy replacement, attachment of power connectors with lid for safety etc.

FULLY MOULDED BASE

• Base Unit is fully moulded from virgin Polycarbonate
• Precisely designed to retain clarity and smoothness in edges
• Fitted with detachable Electrode Assembly for easy replacement
• Carved out Orientation Notches on the side walls facilitate uni-directional placement of gel running trays
• Provision to hold Green Visualization Plate at the bottom which helps in convenient loading of samples.
• This Base unit can accommodate two different sizes of Gel Running trays separately
• Designed to take lesser quantity of buffer. There is a clear marking to indicate the buffer level
• Cushions made of Silicone rubber (4 Nos) are stuck at the base for better grip and safe-placing on the surface.

No need for a separate gel casting assembly to cast the gel Specially designed Gel-Running Tray has slots at both the ends and precisely moulded Stopper-Pads are inserted into these slots The molten agarose gel can be poured into the gel running tray after placing the comb in its position.

The total assembly of Gel running tray with stopper pads inserted into the slots is totally
leak-proof as both the tray and pads are fully moulded to attain utmost dimensional
accuracy.

• No need for a separate gel casting assembly to cast the gel
• Specially designed Gel-Running Tray has slots at both the ends  and precisely moulded Stopper-Pads are inserted into these slots
• The molten agarose gel can be poured into the gel running tray after placing the comb in its position.
• The total assembly of Gel running tray with stopper pads inserted into the slots is totally leak-proof as both the tray and pads are fully moulded to attain utmost dimensional accuracy.

Combs are made of ABS and fully moulded to cut sharp wells on agarose gels There is an additional well for ‘marker’ present in all the combs Probe in one end of the comb exactly fits into the groove present in gel running tray thus avoiding wrong directional placement of comb on the tray

• Combs are made of ABS and fully moulded to cut sharp wells on agarose gels
• There is an additional well for ‘marker’ present in all the combs
• Probe in one end of the comb exactly fits into the groove present in gel running tray thus avoiding wrong directional placement of comb on the tr

• The Lid is elegantly designed and fully moulded from virgin Polycarbonate
• Power-cord is attached to the lid and due to this, the power supply to the unit is disconnected when the lid is removed
• Inner surface of the lid has raised platforms on both ends which would seat exactly on the walls of the base unit and thus facilitate venting out of fumes generated during electrophoresis